NRU-51V+/ NRU-51V NVIDIA Jetson Orin NX/ Xavier NX GMSL2

자율주행 차량 및 텔레오퍼레이션용 러기드 NVIDIA® Jetson Orin™ NX / Xavier™ NX GMSL2 Edge AI 카메라 센서 허브

NRU-51V+/ NRU-51V NVIDIA Jetson Orin NX/ Xavier NX GMSL2

  • Powered by NVIDIA® Jetson Orin™ NX or Xavier™ NX SOM bundled with JetPack 5.1.1
  • Rugged -25°C to 60°C fanless operation
  • Support 4x GMSL2 automotive cameras via FAKRA Z connectors
  • 1x 10GBASE-T 10Gb and 1x 1GBASE-T 1Gb Ethernet port
  • 2x mini-PCIe sockets for WiFi/ GNSS/ NVMe/ CAN modules
  • 1x M.2 3042/ 3052 B key socket for 4G/ 5G mobile communication
  • 1x isolated CAN 2.0, 1x configurable RS232/ 422/ 485 port, and 1x GPS PPS input
  • 8V to 35V wide-range DC input with built-in ignition power control
Overview
Introduction

Neousys의 산업용 Fanless PC NRU-51V+는 GMSL2 카메라를 지원하는 견고한 Jetson Orin™ NX 또는 Xavier™ NX Edge AI 컴퓨터로, ADAS, 원격 조작, 자율 이동 로봇 및 자율 차량을 위한 센서 허브 또는 인식 장치 역할을 할 수 있습니다.

GMSL2 차량용 카메라를 지원, IP67 방수, 하이 다이내믹 레인지(120dB HDR), 오토 화이트 밸런스(AWB), LED 플리커 완화(LFM) 등 첨단 기능을 활용해 산업용 Fanless PC NRU-51V+는 맑은 날부터 칠흑 같은 밤까지 조명 조건에 관계없이 최소한의 대기 시간으로 고품질 이미지를 얻을 수 있습니다. 또한 채널 간 스큐 마이크로초 내에 동시에 4대의 GMSL2 카메라에서 이미지를 획득할 수 있는 고유한 동기화 메커니즘이 있습니다. 또한 GPS PPS 신호를 받아 이미지 데이터를 LIDAR와 정렬하거나 다른 시스템의 카메라를 동기화할 수 있습니다.

NVIDIA® Jetson Orin NX™ NX SOM의 뛰어난 전력 효율성 덕분에 산업용 Fanless PC NRU-51V+는 25W 전력 패키지에서 100 TOPS 추론 성능을 제공합니다. 사용자는 내장된 10GBASE-T 이더넷을 통해 원시 카메라 이미지를 인식 처리를 위해 다른 GPU 서버로 전송할 수 있지만 실시간 객체 또는 ROI 감지를 위해 상당한 TOPS를 활용할 수도 있습니다. 원격 운영 애플리케이션의 경우, 사용자는 하드웨어 H.264/265 비디오 코덱을 사용하여 4대의 GMSL2 카메라에서 실시간으로 비디오 스트림을 인코딩하고 최소 지연 시간으로 5G 통신을 통해 원격 위치의 드라이버로 라이브 비디오 피드를 전송할 수 있습니다.

GMSL2 인터페이스와 Jetson Xavier™ NX의 조합은 단순한 Edge AI 컴퓨터 이상의 산업용 Fanless PC NRU-51V+를 만듭니다. 자동차 카메라와 5G 광대역용 10GbE, CAN 2.0 및 M.2와 같은 I/O 인터페이스가 제공하는 더 큰 비전과 함께, 산업용 Fanless PC NRU-51V는 ADAS의 센서 허브, AGV/AMR의 인식 장치 또는 오프로드 차량의 원격 작동 컨트롤러로서 움직이는 플랫폼에서 중심적인 역할을 합니다.

NRU-51V+ is a rugged Jetson Orin™ NX or Xavier™ NX computer supporting GMSL2 cameras that can act either as a sensor hub or a perception unit for ADAS, teleoperation, autonomous mobile robots, and autonomous vehicles.

By supporting GMSL2 automotive cameras, they enable NRU-51V+ with greater vision capability by taking advantage of advanced features such as IP67 waterproof, high dynamic range (120dB HDR), auto white balance (AWB), and LED flicker mitigation (LFM). NRU-51V+ can obtain high-quality images with minimal latency regardless of lighting conditions, from bright sunny days to pitch-black nights. Moreover, it has a unique synchronization mechanism capable of acquiring images from four GMSL2 cameras simultaneously within microseconds channel-to-channel skew. It can further accept GPS PPS signal to align image data with LIDAR or synchronize cameras on other systems.

Thanks to the great power efficiency of NVIDIA® Jetson Orin NX™ NX SOM, NRU-51V+ delivers 100 TOPS inference performance in its 25W power package. Users can transfer raw camera images through its built-in 10GBASE-T Ethernet to another GPU server for perception processing, but also leverage its significant TOPS for real-time object or ROI detection. For teleoperation applications, users can utilize its hardware H.264/265 video codec, to encode video streams from four GMSL2 cameras in real-time and transmit the live video feed to a driver at a remote location via 5G telecommunication with minimum latency.

The combination of GMSL2 interface and Jetson Orin™ NX makes NRU-51V+ much more than just a simple edge AI computer. With greater vision brought by automotive cameras plus I/O interfaces such as 10GbE, CAN 2.0, and M.2 for 5G broadband, NRU-51V+ plays a central role in a moving platform, as a sensor hub for ADAS, a perception unit for AGV/ AMR, or a teleoperation controller for off-highway vehicles.

NRU-51V+ 제작 블로그 링크입니다.(클릭)

 

  #NRU-51V+ #산업용PC #Fanless PC #차량용PC #Jetson Orin #스마트 팩토리 #자율주행 #Edge AI

Specifications
System Core
Processor NVIDIA® Jetson Orin™ NX system-on-module (SOM), comprising NVIDIA® Ampere GPU and ARM Cortex CPU
Memory 8GB/ 16GB LPDDR4x (Xavier NX 8GB/ 16GB) @ 1600/ 1866 MHz on SOM (15W/ 20W TDP mode)

 

Panel I/O Interface
GMSL Camera 4x GMSL2 FAKRA Z connectors, supporting 4x 1920×1080 @ 30 FPS camera input
Ethernet port 1x 10GBASE-T 10GbE port with screw-lock
1x 1GBASE-T 1GbE port with screw-lock
USB 2x USB 3.1 Gen1 ports (total 5 Gbps shared with M.2 B key)
1x micro USB (OTG only)
Video Port 1x DisplayPort, supporting 3840×2160 at 60Hz
Serial Port 1x hardware configurable RS-232/422/485 port
CAN bus 1x isolated CAN bus 2.0 port
Isolated DIO 1x GPS PPS input, 3-CH isolated DI and 4-CH isolated DO
Ground Terminal 1x M4 ground terminal for chassis ESD shielding
Internal I/O Interface
Mini PCI Express With Orin NX:
1x full-size mini PCI Express socket (PCIe + USB 2.0) for M.2 M 2242 NVMe with adapter for storage
1x full-size mini PCI Express socket (PCIe + USB 2.0) for GNSS, V2X, or CAN
With Xavier NX:
1x full-size mini PCI Express socket (PCIe + USB 2.0) for WiFi, NVMe storage
1x full-size mini PCI Express socket (USB 2.0) for GNSS, V2X, or CAN
M.2 1x 3042/ 3052 M.2 B key (USB 3.1 Gen 1 + USB 2.0) for 4G/5G module with dual SIM support (1x front-accessible, 1x internal)

 

Power Supply
DC Input 1x 3-pin pluggable terminal block for 8V to 35V DC input and ignition power control (V+/ GND/ IGN)

 

Mechanical
Dimension 173 mm (W) x 144 mm (D) x 60 mm (H)
Weight 1.4 kg
Mounting Wall-mount bracket (optional)

 

Environmental
Operating Temperature -25°C to 60°C with passive cooling (15W TDP mode) *
-25°C to 70°C fanless operation (15W TDP mode, without 10GbE transmission)*
-25°C to 70°C with optional fan kit (15W TDP mode)*
Storage Temperature -40°C ~ 85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.8, Category 4
Shock Operating, MIL-STD-810G, Method 516.8, Procedure I
EMC CE/FCC Class A, according to EN 55032 & EN 55035

 

* For sub-zero and over 60°C operating temperature, a wide temperature SD card / NVMe is required.

 

Ordering Information
NRU-51V+-JON8

Rugged NVIDIA® Jetson Orin™ NX(8GB) GMSL2 Camera Sensor Hub with 128GB M.2 2242 M NVMe

NRU-51V+-JON16

Rugged NVIDIA® Jetson Orin™ NX(16GB) GMSL2 Camera Sensor Hub with 128GB M.2 2242 M NVMe

NRU-51V+-JONANO8

Rugged NVIDIA® Jetson Orin™ Nano(8GB) GMSL2 Camera Sensor Hub with 128GB M.2 2242 M NVMe

NRU-51V+-JONANO4

Rugged NVIDIA® Jetson Orin™ Nano(4GB) GMSL2 Camera Sensor Hub with 128GB M.2 2242 M NVMe

NRU-51V-NX8

Rugged NVIDIA® Jetson Xavier™ NX(8GB) GMSL2 Camera Sensor Hub

NRU-51V-NX16

Rugged NVIDIA® Jetson Xavier™ NX(16GB) GMSL2 Camera Sensor Hub

Optional Accessories
GMSL2 cameras

The system compatible with a wide range of GMSL2 2D and 3D cameras with pre-built driver, including TIER IV, e-con, StereoLabs, Intel RealSense. For the complete list, please click on this link

PA-60W-OW

60W AC/ DC power adapter 12V/ 5A; cord end terminals for terminal block, operating temperature: -30 to 60°C

PA-120W-OW

120W AC/ DC power adapter 20V/ 6A; 18AWG/ 120cm; cord end terminals for terminal block, operating temperature: -30 to 70°C

Wmkit-NRU-50

Wall mount kit for NRU-50 series, including wall mount brackets and screws

AccsyBx-FANNRU-50

Fan kit for NRU-50 series, including 92x92mm fan, fan frame, fan cable cover, and screws

Tpkit-NRU-50

3 pcs of 30x30x2 mm thermal pad for mPCIe modules with the max component height between 1.3 mm and 2.4 mm, and M.2 B key modules with the max component height between 0.7 mm and 2.0 mm

FK-FF-CABLE-7M

7M FAKRA cable for cameras with male FAKRA connector; the waterproof end is black

FK-FF-CABLE-15M

15M FAKRA cable for cameras with male FAKRA connector; the waterproof end has heat shrink tube

메뉴 닫기