NRU-160-AWP IP66 방수 Jetson Orin™ NX/ Nano AI 산업용 팬리스 컴퓨터 (New!)

IP66 방수 Jetson Orin™ NX/ Nano AI 컴퓨터, 6x GMSL2 또는 4x PoE+ GbE 포트 포함

NRU-160-AWP IP66 방수 Jetson Orin™ NX/ Nano AI 산업용 팬리스 컴퓨터 (New!)

  • Powered by NVIDIA® Orin™ NX or Orin™ Nano SoM bundled with JetPack
  • IP66 waterproof and dustproof
    - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode
  • -25°C to 70°C fanless operation (No throttling at 70°C with 20W TDP Mode)
  • 6x GMSL2 automotive cameras via FAKRA Z connectors (NRU-161V-AWP)
  • 4x PoE+ GbE via M12 X-coded connectors (NRU-162S-AWP)
  • 1x CAN FD and 1x RS232 via M12 A-coded connectors
  • 225 x 136 x 55 mm low-profile design
  • 8V to 35V wide-range DC input with built-in ignition power control
Overview
Introduction

 

Neousys의 산업용 Fanless PC NRU-160-AWP 시리즈는 NVIDIA® Jetson Orin™ NX 또는 Orin™ Nano로 구동되는 견고한 IP66 방수 에지 AI 컴퓨터입니다. 대상 애플리케이션에는 스마트 시티 도로변 설치, 식품 공장의 AI 검사, 야외 로봇의 인식 장치, 오프로드 차량의 ADAS가 포함됩니다. 또한 합리적인 비용으로 방수 기능을 갖춘 견고한 광범위한 온도 에지 AI를 재정의하는 것을 목표로 하며, 간소화된 기계 설계, 신중하게 선택된 방수 커넥터 및 표준화된 케이블 키트를 통해 달성합니다.

 

NVIDIA® Jetson Orin™ NX로 구동되는 NRU-160-AWP는 최대 100개의 스파스 TOPS(INT8)로 뛰어난 AI 추론을 제공하고 최대 18개의 1080P 비디오 스트림을 동시에 트랜스코딩할 수 있습니다. 비전 기반 AI 애플리케이션에 대한 다양한 카메라 요구 사항을 수용하도록 설계된 산업용 Fanless PC NRU-160-AWP는 두 가지 모델로 제공됩니다. IMX390, ISX031 및 IMX490 CMOS 센서가 있는 선택된 카메라에 대한 사전 빌드 드라이버가 있는 최대 6개의 GMSL2 자동차 카메라를 지원하는 산업용 Fanless PC NRU-161V-AWP와 IP 또는 산업용 GigE 카메라에 대한 4개의 PoE+ GbE 포트를 제공하는 NRU-162S-AWP입니다. 또한 다른 컴퓨터 또는 LiDAR와의 데이터 전송을 위한 방수 GbE 포트가 제공됩니다.

 

산업용 Fanless PC NRU-160-AWP는 캐비닛, 차량 또는 로봇 내부에서 엣지 배포를 위해 설계되었습니다. 225 x 136 x 55mm의 소형 프로필로 좁은 공간에 이상적입니다. 8V~35V의 넓은 DC 입력 범위, 점화 전원 제어, 1x CAN FD 버스 포트, 1x RS232 포트가 장착되어 있습니다. 또한 CAN/COM/WiFi 모듈용 miniPCIe 소켓 1개와 4G LTE/5G NR 모바일 통신 모듈용 M.2 B-키 소켓 1개가 있습니다.

 

IP66 방수 기능, Orin NX AI 성능, 풍부한 온보드 카메라 연결의 통합은 견고성, 성능, 비용 간의 균형을 이룹니다. 스마트 농업, 광산, 건설, 도로변 애플리케이션, 엣지 검사 및 야외 AMR을 위한 즉시 배포 가능한 방수 엣지 AI 플랫폼입니다.

 

The NRU-160-AWP series is a rugged, IP66 waterproof edge AI computer driven by an NVIDIA® Jetson Orin™ NX or Orin™ Nano. Its target applications include smart city roadside installations, AI inspection in food factories, perception units for outdoor robots, and ADAS for off-highway vehicles. Furthermore, it aims to redefine rugged, wide-temperature edge AI with its waterproof features at an affordable cost, achieved through a streamlined mechanical design, carefully selected waterproof connectors and standardized cable kit.

 

Powered by NVIDIA® Jetson Orin™ NX, the NRU-160-AWP delivers superior AI inference with up to 100 sparse TOPS (INT8) and can transcode up to eighteen 1080P video streams simultaneously. Designed to accommodate various camera requirements for vision-based AI applications, the NRU-160-AWP comes in two models: the NRU-161V-AWP, which supports up to 6x GMSL2 automotive cameras with pre-built drivers for selected cameras with IMX390, ISX031, and IMX490 CMOS sensors; and the NRU-162S-AWP, which offers 4x PoE+ GbE ports for IP or industrial GigE cameras. Additionally, a waterproof GbE port is provided for data transmission with other computers or LiDAR.

 

The NRU-160-AWP is designed for edge deployment, whether in-cabinet, in-vehicle, or in-robot. Its compact 225 x 136 x 55 mm profile makes it ideal for confined spaces. It is equipped with an 8V to 35V wide DC input range, ignition power control, 1x CAN FD bus port, and 1x RS232 port. It also features one miniPCIe socket for CAN/ COM/ WiFi modules and one M.2 B-key socket for 4G LTE/ 5G NR mobile communication modules.

 

The integration of IP66 waterproof capability, Orin NX AI performance, and rich onboard camera connectivity strikes a balance between ruggedness, performance, and cost. It is a ready-to-deploy waterproof edge AI platform for smart agriculture, mining, construction, roadside applications, edge inspection, and outdoor AMRs.

 

#NRU-162S-AWP #산업용PC #Fanless PC #IP66 방수 #스마트 팩토리 #방수 #방진 #Edge AI

Specifications
System Core
Processor NVIDIA® Jetson Orin™ NX system-onmodule (SOM), comprising NVIDIA® Ampere GPU and ARM Cortex CPU NVIDIA® Jetson Orin™ Nano systemon-module (SOM), comprising NVIDIA® Ampere GPU and ARM Cortex CPU
Memory 16GB/ 8GB LPDDR5 @ 3200 MHz on SOM 8GB/ 4GB LPDDR5 @ 2133 MHz on SOM

 

Panel I/O Interface
GMSL2 NRU-161V-AWP 6x waterproof GMSL2 FAKRA Z connectors, supporting multiple
configurations:
Configuration A. 6x AC-IMX390 (2MP@30FPS)
Configuration B. 6x AC-ISX031 (3MP@30FPS)
Configuration C. 4x AC-IMX490 (5MP@30FPS)
Ethernet Port NRU-161V-AWP 1x Gigabit Ethernet port via M12 X-coded 8-pin connector
Ethernet Port NRU-162S-AWP IEEE 802.3at PoE+ PSE for Port 1 to Port 4 with 50W total power budget
PoE+ NRU-162S-AWP IEEE 802.3at PoE+ PSE for Port 1 to Port 4 with 50W total power budget
USB 2x USB 2.0 ports via M12 A-coded 8-pin connector
1x USB Type C port (for system flashing and OTG, under service door)
Video Port 1x VGA, supporting 1920×1080 at 60Hz via M12 A-coded 17-pin connector
Serial Port 1x RS-232 port via M12 A-coded 8-pin connector
CAN bus 1x CAN FD port via M12 A-coded 8-pin connector
Isolated DIO 1x isolated GPS PPS input via M12 A-coded 8-pin connector
Internal I/O Interface
Mini PCI Express

1x full-size mini PCI Express socket (PCIe + USB 2.0)

M.2 1x M.2 3042/3052 B key (USB 3.2 Gen 1 + USB 2.0) for LTE/5G module with dual micro SIM support
Storage
M.2 NVMe 1x M.2 2242 M key socket (PCIe Gen 3×1) for NVMe SSD
Power Supply
DC Input 8V to 35V DC input and ignition power control via M12 A-coded, 5-pin connector (IGN/ GND/ V+) [1]
Mechanical
Dimension 225 mm (W) x 136 mm (D) x 55 mm (H) (excluding wall-mount)
Weight 3.0 kg (excluding wall-mount)
Mounting VESA 75 mount (standard), Wall-mount (standard)
Environmental
Operating temperature

-25°C to 70°C with passive cooling (20W TDP mode) [2] 

 

With full CPU+GPU stressing:
1. NRU-160-AWP non-throttling at 70°C with 20W TDP mode
2. NRU-160-AWP non-throttling at 60°C with 25W TDP mode (Orin NX MAXN)

Storage temperature -40°C ~ 85°C
Humidity 10% ~ 90% , non-condensing
Vibration MIL-STD-810H, Method 514.8, Category 4
Shock MIL-STD-810H, Method 516.8, Procedure I
EMC

CE/ FCC Class A, according to EN 55032 & EN 55035
EN 50121-3 (EN 50155:2017, Clause 13.4.8) (NRU-162S-AWP only)

[1]The required DC input range is 8V to 35V when the system load is under 60W. The required DC input range is 12V to 35V when the system load is between 60W to 96W. The required DC input range is 20V to 35V when the system load is between 96W to 160W.
[2]For sub-zero and over 60°C operating temperature, a wide temperature HDD or Solid State Disk (SSD) is required.
Ordering Information
NRU-161V-AWP

IP66 Waterproof Jetson Orin™ NX/ Nano Edge AI Computer with 6x GMSL2 Ports

NRU-162S-AWP

IP66 Waterproof Jetson Orin™ NX/ Nano Edge AI Computer with 4x PoE+ GbE Ports

Jetson Module Option

Options for Different Jetson Orin™ NX and Jetson Orin™ Nano SKUs

NVMe Option

Options for Different Capacities of M.2 2242 NVMe Storage

Optional Accessories
GMSL2 cameras

The system compatible with a wide range of GMSL2 2D and 3D cameras with pre-built driver, including TIER IV, e-con, StereoLabs, Intel RealSense. For the complete list

PA-60W-OW

60W AC/DC power adapter 12V/5A; cord end terminals for terminal block, operating temperature: -30 to 60°C

PA-160W-OW

160W AC/DC power adapter 20V/8A; 18AWG/120cm; cord end terminals for terminal block, operating temperature: -30 to 70°C

메뉴 닫기